10 Wheel 70 Tons Truck Head Features
1. Driving axle model is HC16, there are have MCP16 axle optional.
2. Front axle use new model VGD95, 9500kg loading capacity, super loading capacity.
3. Can add the extra fuel tank for long distance cargoes haulage, material is carbon steel.
4. Gearbox with power take off, suitable for connect the tipping semi trailer and some trailer need power.
10 Wheel 70 Tons Truck Head Specification
Description | Parameter Value |
Product Name | 10 Wheel 70 Tons Truck Head |
Application | Bulk cargo and container transport |
Engine | WD615.47, 371HP, EURO II |
Gearbox | HW19710, 10 forward and 2 reverse |
Cabin | HW76, with one bed, A/C |
Tire | 12.00R20, 10+1 pcs |
Driving Axle | HC16, 2x16000kg |
Fuel Tank | 600L |
Loading Ton | 70,000kg |
Dimension | 6800x2560x3150mm |
The 10 Wheel 70 Tons Truck Head specification only for your reference, we can manufacture other model 10 Wheel 70 Tons Truck Head basic your request.
10 Wheel 70 Tons Truck Head Driving Axle
The driving axle of 10 Wheel 70 Tons Truck Head model have HC16, MCP16 and MCY13BGS. The HC16, MCP16 axle loading capacity is 16000kg, suitable for heavy duty cargoes transport, like transport mining material. MCY13BGS axle loading capacity is 13000kg, suitable for light duty work, such as transport the container and some standard weight cargoes haulage. We will recommend you suitable model axle according to the cargoes weight.
How To Maintenance 10 Wheel 70 Tons Truck Head ?
1. Maintenance to check the traction seat parts, especially to check the traction pin, traction pin plate, half cross shaft and other parts of the wear and tear, and lubrication of these parts.
2. Tighten the support seat bolts, if necessary, replace the bolts; adjust the locking hook and traction pin clearance, the adjustment method is to adjust the screw, after adjustment through the nut locking.
3. Disassemble the traction seat check, pay attention to check the traction seat itself has no cracks and serious wear, if there are cracks or serious wear and tear and make the traction seat deformation or too thin, should be replaced with new parts; check the lock hole, available traction pin for fit detection, if the wear exceeds the limit resulting in a large fit clearance, can be welded and processed to the required size to repair.