4 Axles Fuel Tanker Semi Trailer

4 Axles Fuel Tanker Semi Trailer Introduce

The 4 Axles Fuel Tanker Semi Trailer structure of the oil tank is an elliptical cylindrical body or a trapezoidal surface cylindrical body, which is made of high-quality steel plates. The entire tank body is divided into single or multiple warehouses. The warehouse can be divided into chambers. There are through holes at the lower end of the middle partition plate. There are multiple compartments, and the compartments can be divided into compartments. There are through holes at the lower end of the middle partition plate. The middle of each compartment is welded with a sub-silo to strengthen the wave partition to reduce the impact of the oil in the tank and improve the rigidity of the tank.

4 Axles Fuel Tanker Semi Trailer Specification

1. Dimension: 12500x2500x3800mm

2. Axle: 4x16 tons, ZY brand

3. Tire: 12R22.5, 16 pcs, LINGLONG

4. Main Beam: lower 16mm, middle 10mm

5. Support Leg: JOST brand, 28 tons

6. Tractor Pin: JOST brand, 90#

7. Suspension: 8mm thickness, heavy duty loading

8. Leaf Spring: 90x16mmx10pcs

9. Wheel Rim: 16mm

10. Brake Valve: WABCO brand

11. Hooks: Stronger hooks

4 Axles Fuel Tanker Semi Trailer Details

4 Axles Fuel Tanker Semi Trailer Breathing Valve:

In order to ensure that the 4 Axles Fuel Tanker Semi Trailer is working, the pressure in the tank is basically the same as the atmospheric pressure, a breathing valve is installed on the large cover of the tank, when the oil in the tank is heated and expanded or when the oil pump is used to refuel the tank, The oil level rises and the pressure increases. When the pressure in the tank is higher than the external pressure of 8KPA, the upper valve plate of the breathing valve opens; when the oil pump is used to discharge oil outward or the oil shrinks due to cold, the oil level drops and the pressure decreases. When the external pressure is lower than 3KPA, the lower valve plate of the breathing valve is opened.

4 Axles Fuel Tanker Semi Trailer Shot Blasting And Sand Blasting

Shot blasting is divided into shot blasting cleaning and shot blasting strengthening. Shot blasting is to remove impurities such as oxide scale on the surface and improve the appearance quality. Shot blasting can improve the fatigue fracture resistance of materials/parts, prevent fatigue failure, plastic deformation and brittle fracture, and improve fatigue life.